Start with the seam
Choose a straight seam, a quarter-circle arc, or a rounded corner. The radius describes the stitch line; The shaded band extends to your edge margin; it is a seam study, not a complete cutting pattern.
Plan your seam. Test your iron. Take it to the workbench.
Every hole
has its place.
Print at 100%. Measure the 20 mm square first.
Choose a straight seam, a quarter-circle arc, or a rounded corner. The radius describes the stitch line; The shaded band extends to your edge margin; it is a seam study, not a complete cutting pattern.
Click a hole or use the arrows. The ghost iron is a rigid straight row at the selected pitch. The first tooth is anchored at the selected hole and the iron points toward the last target. Maximum tooth-to-target offset is shown in millimeters; partial placements omit unused teeth at the seam end.
SVG and direct PDF export use the same hole coordinates as the canvas. A 20 mm calibration square checks printer scaling. Test on scrap leather first.
A rigid multi-tooth iron cannot follow a tight curve perfectly. For an 8 mm radius, the 90° arc is 12.566 mm long. Balanced Layout divides it into three intervals of 4.189 mm: +8.8% against a 3.85 mm pitch. The chord between adjacent holes is different again.
Exact Iron Pitch preserves distance along the path, not a guarantee that a straight iron fits a curve. Review the ghost offset. On tight curves, use a single tooth or awl, change the radius, or reconsider endpoint constraints. The 0.15 mm highlight threshold is a planning aid, not a manufacturing tolerance.
Seam studies only; these are not complete cutting patterns.
| Pitch | SPI ≈ | Visual density |
|---|---|---|
| 2.7 mm | 9.41 | Fine |
| 3.38 mm | 7.51 | Fine–medium |
| 3.85 mm | 6.60 | Medium |
| 4 mm | 6.35 | Medium |
| 5 mm | 5.08 | Open |
SPI = 25.4 ÷ pitch in millimeters. These are comparison points, not universal recommendations. Leather thickness, thread, hole shape and your stitch technique all affect the result.
Exact preserves the requested distance along the path and leaves a remainder at the end. Balanced fits both endpoints by adjusting the interval. Neither mode certifies multi-tooth punchability: check the ghost iron and test the material.
Reduce the number of teeth as curvature increases. A single-tooth tool can place individual holes without requiring several curved points to lie on one straight line. Avoid forcing a multi-tooth iron into existing holes.
Use 100% or Actual Size, disable page fitting and measure the 20 mm square. Browser PDF uses A4 with 10 mm margins and a 180 × 160 mm drawing. Letter users should confirm margins and scaling in their print dialog.
This tool stores settings in your browser only, when storage is available. It does not upload your pattern. Blogger and existing advertising services may still use cookies; see the privacy note below.
About: StitchArc Lab is a browser-based leather stitch planning tool. Geometry is an estimate of hole centers; tooth width, slant, material stretch and tool wear are not modeled. Always verify measurements on scrap before production.
Privacy: tool settings remain on this device. This site is hosted by Blogger and may display existing Google advertising. Google may use cookies for advertising and measurement. Manage choices at Google My Ad Center. Google My Ad Center ↗